Call For a Free Quote
Maryland 3015910991
Virginia 7033491055
Washington D.C. 2025363036

In-Depth Guide: How to Сhoose Garage Door Springs


Springs play a very important role in the opening and closing mechanisms of a garage door. While the garage door opener is responsible for initiating and controlling the motions of a garage door, it is the springs that open and close the door.

Springs act to overcome the weight of the garage door when in motion. How long do garage door springs last? Springs have a lifetime which is about 7–8 years, depending on how often you open the door, so you can expect the springs to wear out. The good news is that you can replace them.

You have two options, either you call up a professional or buy new springs. Should you go for the latter option, then you may wonder, “Which garage door spring do I need to buy?” Continue reading to find out all you need to know about how to choose a garage door spring. This garage door spring selection guide has all the details you will need to make the right choice.


24/7 Emergency
Garage Door Service
Contact Us

Before we answer your question “What garage door spring do I need?”, it is important to understand the two types of springs: torsion and extension.


Torsion springs are tough coiled springs placed on a metal rod. This metal rod lies parallel to the garage door. Because they are tightly coiled, torsion springs store a lot of energy, which is generated and transferred to the springs as the garage door moves. Torsion springs make it easier for the garage door to open and close. As the door opens, the springs uncoil, releasing energy that opens the garage door. There are two types of torsion springs:

  • Standard. This type is usually mounted on the garage door. It is cheaper and mostly used for residential garage doors.
  • Torque Master. Because these springs remain in place, they are considered the safest.


Unlike torsion springs that are heavy and stiff, extension springs are much lighter. They are almost the opposite of torsion springs. These lie perpendicular to the garage door. Extension springs are placed on the door tracks. You can find these springs between the ceiling and the garage door tracks. The main function of extension springs is to store energy as the door closes. When the door opens, the energy is released.

While these two types of springs differ, it is unlikely that you would make a mistake when buying one. Extension springs can further be divided into:

  • Open looped. This type is easy to replace and does not need to be disassembled.
  • Double looped. These are tougher than open looped springs; they have two coils at each end.
  • Clip ends. This option includes the strongest extension springs; clip end springs have a longer lifespan.

All you need to understand is which type of spring is damaged, and you can purchase accordingly. However, if you are unable to understand which spring has suffered damage, you can always seek advice from an expert.

garage door torsion spring


Garage door springs usually come color-coded which can help you understand the size. This coding system can be confusing, so let us discuss the Color coding system for both extension and torsion spring. The color codes are different depending on the type of spring.

Torsion springs use a color-coding system based on the wind direction. Black indicates right wind, and red is for left wind. The color-coding system is also used to determine the wire size. This makes it easier for professionals to understand the type of spring to buy. Technicians will typically look at the shape of the gauge to determine the condition of a spring.

The color-coding system for extension springs is designed to help technicians figure out the lifting power. The lifting power varies for different garage doors. The main factor that causes these differences is the garage door weight. So only specific springs can lift the garage door. The color correlates with the lifting power. Here are some examples:

  • Tan: 100, 200 pounds
  • White: 110, 210 pounds
  • Green: 120, 220 pounds
  • Yellow: 130, 230 pounds
  • Blue: 140, 240 pounds
  • Red: 150, 250 pounds
  • Brown: 160, 260 pounds
  • Orange: 170, 270 pounds
  • Gold: 180, 280 pounds
  • Light blue: 190, 290 pounds


Our garage door torsion spring selection guide should help you get started. Here is how to choose the correct garage door torsion spring.


This is one of the most important things to consider when choosing the right torsion spring for a garage door. This helps you know the exact size of the spring to get. Measure the entire length of the spring. It should be at least 10 to 20 coils. The measurements should be in inches.

Once you have the measurement, use wire size charts to determine the correct spring to buy. Avoid tampering with the springs above the door when making measurements.


For most garage doors, the inside diameter will be indicated between the springs above the door. The inside diameter is measured to the nearest ⅙ inch. However, if you do not have the diameter of that spring, then you can measure it yourself. To do this, you should remove the spring. This can be a hazardous task, so it is best to leave it to a professional. Measuring the inside diameter is important so that you buy a spring that will fit tightly and produce just the right amount of torque.


If you want to know how to choose a torsion spring for a garage door, consider the length. The overall length of a spring is measured from one end to the other. This length determines the winding capacity of a spring.

The spring length should be measured to the nearest ¼ inch. If the spring is too short, then the door may not open. Measure the length only when the garage door is closed.


Another thing to consider when figuring out how to choose the right torsion spring for a garage door is the wind direction. To check the wind direction, you have to check inside the garage door. There are two springs, left and right, that can help you figure this out. When you open the garage door, notice the two springs which are placed at the middle point.

Check the ends of the springs. The left spring will point in a clockwise direction, while the right one will point in an anticlockwise direction. But keep in mind that the two springs will be vice versa when you open the inside of the garage door.

choose garage door springs


24/7 Emergency
Garage Door Service
Contact Us

Do you want to know how to choose garage door extension springs? You have two ways of doing that: using color codes or the weight of the garage door. Color codes provide an easier and faster way of choosing the spring to buy. Always consider the weight when you want to choose the correct extension spring for a garage door. The code is placed at the end of the spring. While this is an accurate way to purchase extension springs, you can use other methods.

For example, you can compare the spring to the weight of the garage door. Different doors have extension springs based on the weight and height of the door. To measure the door, you will need some clamps and a bathroom scale. Place the clamps under the bottom rollers and carefully remove the extension springs. Slowly place the door’s edge on the scale. The weight that the scale shows is the size of the extension springs you should buy.


Because garage doors are different, the type and sizing of garage door springs you buy should depend on your door. The main factors that determine spring type are the door height and width. Here is a table with recommended springs.

Width Height Recommended Spring
8’ 7’ SK7153, SK7155
9’ 7’ SK7155, SK7157
10’ 7’ SK7159, SK7157
16’ 7’ SK7159
16’ 7’ SK7159, SK7153

As stated above, wire size is one of the key measurements to know to pick the appropriate garage door spring sizing for a torsion spring. You can use this garage door torsion spring chart for standard sizes.

10-coil size,


20-coil size,


Wire size
1 3/4 3 1/2 0.177
1 7/8 3 3/4 0.1875
1 15/16 3 7/8 0.192
2 4 0.2
2 1/16 4 1/8 0.207
2 3/16 4 3/8 0.2187
2 1/4 4 1/2 0.2253
2 3/8 4 11/16 0.2343
2 3/8 4 3/4 0.2375
2 7/16 4 7/8 0.2437
2 1/2 5 0.25
2 5/8 5 1/4 0.2625
2 3/4 5 1/2 0.273
2 3/16 5 5/8 0.283
2 7/8 5 3/4″ 0.289
3 1/16 6 1/8 0.3065
3 1/8 6 1/4″ 0.3125
3 3/16 6 3/8″ 0.3195
3 5/16 6 5/8″ 0.331
3 7/16 6 7/8″ 0.3437
3 5/8 7 1/4″ 0.3625
3 3/4 7 1/2″ 0.375
3 15/16 7 7/8″ 0.3938
4 1/16 8 1/8″ 0.4062
4 7/32 8 7/16″ 0.4218
4 5/16 8 5/8″ 0.4305
4 3/8 8 3/4″ 0.4375
4 17/32 9 1/16″ 0.4531
4 5/8 9 1/4″ 0.4615
4 11/16 9 3/8″ 0.4687
4 7/8 9 3/4″ 0.49
5 10″ 0.5
5 5/16 10 5/8″ 0.5312
5 5/8″ 11 1/4″ 0.5625
6 1/4 12 1/2″ 0.625


Now that you know a strategy for selecting garage door torsion springs, let’s discuss costs. When a spring is damaged, it should be replaced immediately. A single spring usually costs about $120-300. Some manufacturers have springs that cost less than $20. The disadvantage of buying cheaper ones is that they do not last long. So, in the long run, you will end up spending more money.

The overall cost will depend on where you buy the springs from and how many are damaged. Another thing to consider is the labor. Different companies have varying prices for spring replacement services. Regardless, it shouldn’t cost more than $500 to replace your old springs with new ones.

For example, high-quality torsion springs should have no less than 10,000 cycles. This means they should last at least 7 years before getting damaged. Extension springs need to have about 10,000 to 12,000 cycles. Depending on how frequently the garage door is used, it can last for up to 10 years.

garage door extension springs


Do you need to replace your garage door springs? Then STI Garage Door is the company to call. We can help you with choosing a garage door torsion spring. Because we work with all types of doors, we can help you choose a garage door extension spring as well. Our experts can help you buy the right torsion and extension springs. Our services include maintenance, repair, and replacements.

Because we have been around for years, you can expect only the best work from us. Regular maintenance allows our experts to identify that springs are damaged early on. Prevent harmful situations by letting our experts do the work for you. Whether you have a commercial or residential garage door, no task is impossible for us. Our main goal is to ensure that all our customers are satisfied with the services that we provide.

Call STI Garage Door now to find out how to buy and reply torsion and extension springs. Enjoy great services at a cost-effective price!


24/7 Emergency
Garage Door Service
Contact Us

Selecting a proper torsion spring for a garage door is very important. Knowing the type of spring that is damaged is a good way to understand how to know what garage door spring to buy. Garage doors have two types of springs: torsion and extension. Both facilitate the opening and closing motions of the door. They serve to store energy as the door opens and closes. To choose the right torsion spring, you must measure the wire size, inside diameter, overall length, and wind direction. You can also use color codes that are based on the wind direction of spring. Extension springs also have a color-coding system to assist professionals to pick the right type. The various colors are placed at the end of a spring based on the weight or type of garage door.

Replacing a spring can lead to accidents if not done correctly. So call STI Garage Door to replace your torsion and extension springs.

Operating in the garage door industry for over 25 years, STI Garage Door is dedicated to quality service and excellence in everything.

The company is a proud partner to the top brands in the field — LiftMaster for commercial door openers and Amarr and Clopay for residential and commercial doors.

How useful was this post?

Click on a star to rate it!

Average rating 3.3 / 5. Vote count: 19

No votes so far! Be the first to rate this post.

Related Services
Related Articles
Popular Posts
Spring Replacement
$25.00 off
Not valid with any other discounts offer!
Opener Repair
$15.00 off
Not valid with any other discounts offer!
New Garage Door
$100 off Single Door
$150 off Double Door
Not valid with any other discounts offer!
New Garage Door Opener
$50.00 off
Not valid with any other discounts offer!
Senior and Military
Extra 5% off
Not valid with any other discounts offer!
Tune-Up Special
$85.00 off
Not valid with any other discounts offer!
Show More +
faq man

How do I know what garage door spring to purchase?

Basically, you will choose between two spring types, mainly extension springs and torsion springs. Torsion springs are heavy and stiff springs on the rod parallel to the door. Extension springs are lightweight long springs running perpendicular to the door.

Knowing the spring type, you should also take the correct measurements to select the right garage door spring sizing. The parameters to measure include spring diameter, length, wire size, and the exact direction in which the spring is wound.

What size garage door spring do I need?

Typically, your choice will fall between 25-inch and 27-inch springs for 7’ and 8’ high doors accordingly. However, to choose a spring that will fit your door to a tee, there are a few other measurements that matter.

Thus, for a torsion spring, you need to know the spring length, inner diameter, wire size, and wind direction. Meanwhile, for an extension spring, a door weight is a decisive parameter. Both spring types use color-coding systems to make the sizing clearer for you and ease your choice.

Can I replace a different garage door spring?

It might seem that garage door springs of the same type are interchangeable. In fact, they are not. Though standard to a certain extent, they come in different sizes and strengths. So it’s advisable that you choose a spring for your particular door to avoid any operational problems and potential damages in the future that might bring additional repair costs.

Contact STI and unlock the best service in garage door installation today:
Contact Us!

24/7 Emergency Service

Maryland 3015910991

Virginia 7033491055

Washington D.C. 2025363036